Blade 6 Triple Core Dartboard, Surround & Plasma Light Bundle

The Blade 6 Triple Core Dartboard, Surround & Plasma Light Bundle combines the Winmau Blade 6 Triple Core board, a Winmau printed surround and the Winmau Plasma LED light. The board is made from East African sisal built into a three-layer core, the third layer being a high-compression section reinforced with carbon fibre to increase fibre density behind the playing surface. The surround is a printed ring with a 436mm inner opening that sits around the outer wire, and the Plasma is an aluminium lighting ring that mounts to the wall over the board and surround.

The board measures 450mm in diameter and 38mm deep, and uses ultra-thin staple-free wiring set at a 60 degree deflection angle, so a dart striking a wire is guided into the bed rather than bouncing out. Density Control wire adjusts the wire profile across the doubles, trebles and bullseye, and the hardened bullseye and outer bull are 25% thinner than the previous generation, which enlarges the target on the highest-scoring zones. A Rota-Lock mounting system and Spirit Master levelling tool are supplied with the board, so it can be hung level and rotated periodically to spread wear evenly across the sisal.

The surround runs out to 675mm, adding roughly 120mm of catching area so stray darts hit the surround rather than the wall. The Plasma carries 132 natural warm white LEDs rated at 2000 lumens around its inner face, directing light onto the board from every angle so darts already in the board cast minimal shadow across the trebles. It is mains powered through a supplied adaptor with interchangeable plugs and mounts to the wall only, so it cannot be used with a dartboard stand.

1 x Winmau Blade 6 Triple Core dartboard
1 x Rota-Lock mounting system
1 x Spirit Master levelling tool
1 x Winmau printed dartboard surround
1 x Winmau Plasma LED dartboard light
1 x Mains power adaptor with interchangeable plugs
Light mounting fixtures and fittings